To make it easier to install your projectors – that screw into a 1.5” vacuum fitting or wall fitting – SEAMAID offers installation kits to be used behind the wall of an above-ground or in-ground pool. If your pool needs its old PAR56 projector renovated, opt for the renovation kit that includes a SEAMAID Ecoproof PAR56 lamp, as well as the cable connection kit.
Installation Kit for Above ground pool
Ref. 501009
3-piece ABS kit M50 / F25 with seal and cable gland. To fix behind a 50mm vacuum fitting or wall fitting when installing flat projectors or mini projectors.
Installation Kit for Inground pool
Ref. 501368
ABS two-part kit comprising an F2’’ threated / F50 to glue adapter and F50 to glue / M¾ threated. To be used when installing SEAMAID flat projectors and mini projectors for in-ground pools.
F2’’/M2’’ Extension
Ref. 501054
ABS extension to screw F2’’/M2’’ for the installation of a tubular projector.
Cable connection kit
Ref. 501689
Cable connection kit specially for renovations, including a 40 cm watertight heat shrink sleeve, 2 heat shrink connectors and 1 40 cm H07RNF 2 x 4 mm² cable.
AQUAREVA Renovation kit
Ref. (see pictures)
ABS crowns, 3 adjustable legs, 6 stainless steel screws, the EcoproofTM renovation kit comes in 5 versions. To know more
SEAMAID Renovation kit
Ref. (see pictures)
The SEAMAID renovation kit is delivered with 3 deformable legs, 3 stainless steel screws 316L and is available in 5 colours: white, light blue, sand, light grey and medium grey. To know more
Gelbox
Réf. 504338
Accessory prefilled with gel for straight connections for protection and insulation of electrical connections with terminal strips. To know more
Ideas and recommendations
SEAMAID renovation kits make your life easier, and most importantly can avoid major, expensive work. Watch the videos posted on our Youtube channel, and read through the instruction manuals to help you out during the work phase.